Microbial colonization and biofilm formation on implanted devices represent an important complication in orthopaedic and dental surgery and may result in implant failure. Controlled release of antibacterial agents directly at the implant site may represent an effective approach to treat these chronic complications. Resistance to conventional antibiotics by pathogenic bacteria has emerged in recent years as a major problem of public health. In order to overcome this problem, non-conventional antimicrobial agents have been under investigation. In this study, polyacrylate-based hydrogel thin coatings have been electrosynthesised on titanium substrates starting from poly(ethylene glycol diacrylate)–co– acrylic acid. Silver nanoparticles (AgNPs) with a narrow size distribution have been synthesized using a “green” procedure and immobilized on Ti implant surfaces exploiting hydrogel coatings’ swelling capabilities. The coatings have been characterized by XPS and SEM/EDX, while their silver release performances have been monitored by ICP–MS. The antibacterial activity of these AgNP-modified hydrogel coatings was tested evaluating in vitro inhibition growth of Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli, among the most common pathogens in orthopaedic infections. Moreover, a preliminary investigation of the biocompatibility of silver-loaded coatings versus MG63 human osteoblast-like cells has been performed. An important point of strength of this paper, in fact, is the concern about the effect of silver species on the surrounding cell system in implanted medical devices. Silver ion release has been properly tuned in order to assure antibacterial activity while preserving osteoblasts’ response

The aim of this study was to characterize nanoparticles (NPs) composed of chitosan (CS) and evaluate their potential for brain delivery of the neurotransmitter Dopamine (DA). For this purpose, CS based NPs were incubated with DA at two different concentrations giving rise to nanocarriers denoted as DA/CSNPs (1) and DA/CSNPs (5), respectively. X-ray Photoelectron Spectroscopy (XPS) analysis confirmed that DA was adsorbed onto the external surface of such NPs. The cytotoxic effect of the CSNPs and DA/CSNPs was assessed using the MTT test and it was found that the nanovectors are less cytotoxic than the neurotransmitter DA after 3 h of incubation time. Transport studies across MDCKII-MDR1 cell line showed that DA/CSNPs (5) give rise to a significant transport enhancing effect compared with the control and greater than the corresponding DA/CSNPs (1). Measurement of reactive oxygen species (ROS) suggested a low DA/CSNPs neurotoxicity after 3 h. In vivo brain microdialysis experiments in rat showed that intraperitoneal acute administration of DA/CSNPs (5) (6-12 mg/kg) induced a dose-dependent increase in striatal DA output. Thus, these CS nanoparticles represent an interesting technological platform for DA brain delivery and, hence, may be useful for Parkinson's disease treatment. (C) 2011 Elsevier B.V. All rights reserved.

New promising and versatile materials for the development of in situ sustained release systems consisting of thin films of either poly(2-hydroxyethyl methacrylate) or a copolymer based on poly(ethylene-glycol diacrylate) and acrylic acid were investigated. These polymers were electrosynthesized directly on titanium substrates and loaded with ciprofloxacin (CIP) either during or after the synthesis step. X-ray photoelectron spectroscopy was used to check the CIP entrapment efficiency as well as its surface availability in the hydrogel films, while high-performance liquid chromatography was employed to assess the release property of the films and to quantify the amount of CIP released by the coatings. These systems were then tested to evaluate the in vitro inhibition of methicillin-resistant Staphylococcus aureus (MRSA) growth. Moreover, a model equation is proposed which can easily correlate the diameter of the inhibition haloes with the amount of antibiotic released. Finally, MG63 human osteoblast-like cells were employed to assess the biocompatibility of CIP-modified hydrogel coatings.

Osteointegration of titanium implants could be significantly improved by coatings capable of promoting both mineralization and angiogenesis. In the present study, a copolymeric hydrogel coating, poly-2-hydroxyethyl methacrylate-2-methacryloyloxyethyl phosphate (P(HEMA-MOEP)), devised to enhance calcification in body fluids and to entrap and release growth factors, was electrosynthesized for the first time on titanium substrates and compared to poly-2-hydroxyethyl methacrylate (PHEMA), used as a blank reference. Polymers exhibiting negatively charged groups, such as P(HEMA-MOEP), help to enhance implant calcification. The electrosynthesized coatings were characterized by X-ray photoelectron spectroscopy and atomic force microscopy. MG-63 human osteoblast-like cell behaviour on the coated specimens was investigated by scanning electron microscopy, MTT viability test and osteocalcin mRNA detection. The ability of negatively charged phosphate groups to promote hydroxyapatite-like calcium phosphate deposition on the implants was explored by immersing them in simulated body fluid. Similar biological responses were observed in both coated specimens, while calcium-phosphorus globules were detected only on P(HEMA-MOEP) surfaces pretreated with alkaline solution. Testing of the ability of P(HEMA-MOEP) hydrogels to entrap and release human recombinant vascular endothelial growth factor, to tackle the problem of insufficient oxygen and nutrient delivery, suggested that P(HEMA-MOEP)-coated titanium prostheses could represent a multifunctional material suitable for bone restoration applications.

A new hybrid material (3) consisting of trifluoromethyl ketone (TFMK) moieties, immobilized on silica through an appropriate spacer, was synthesized and characterized. Lacking easily oxidizable functionalities in the spacer chain, this material proved to be an excellent catalyst in heterogeneous epoxidations with potassium caroate (KHSO5), surpassing other reported catalysts in performance and stability. The efficiency of silica-supported catalyst 3 could be assessed upon carrying out the selective dioxirane-mediated epoxidation of representative alkenes in high yields. The solid catalyst could then be recovered and reused in a number of consecutive oxidation cycles.

The formulation and characterization of dopamine (DA)-loaded chitosan nanoparticles (CSNPs) are described as preliminary steps for the development of potential DA carrier systems intended for Parkinson's disease treatment. For this purpose, CSNPs were firstly produced and, afterwards, they were incubated in a DA aqueous solution to promote neurotransmitter loading. The characterization of the resulting nanoparticles started with Fourier transform infrared spectroscopy analysis to ascertain the presence of DA in the nanocarrier, whereas X-ray photoelectron spectroscopy analysis provided evidence of the localization of DA on the nanoparticle surface. A quartz crystal microbalance with dissipation monitoring (QCM-D) was then exploited to investigate both swelling of CSNPs and interaction of DA with CSNPs. In particular, the QCM-D revealed that this interaction is fast and so this allows a stable nanostructured system to be obtained.

The aim of this study was to evaluate chitosan (CS)-, glycol chitosan (GCS)- and corresponding thiomer-based nanoparticles (NPs) for delivering dopamine (DA) to the brain by nasal route. Thus, the polyanions tripolyphosphate and sulfobutylether-β-cyclodextrin (SBE-β-CD), respectively, were used as polycation crosslinking agents and SBE-β-CD also in order to enhance the DA stability. The most interesting formulation, containing GCS and SBE-β-CD, was denoted as DA GCS/DA-CD NPs. NMR spectroscopy demonstrated an inclusion complex formation between SBE-β-CD and DA. X-ray photoelectron spectroscopy analysis revealed the presence of DA on the external surface of NPs. DA GCS/DA-CD NPs showed cytotoxic effect toward Olfactory Ensheathing Cells only at higher dosage. Acute administration of DA GCS/DA-CD NPs into the right nostril of rats did not modify the levels of the neurotransmitter in both right and left striatum. Conversely, repeated intranasal administration of DA GCS/DA-CD NPs into the right nostril significantly increased DA in the ipsilateral striatum. Fluorescent microscopy of olfactory bulb after acute administration of DA fluorescent-labeled GCS/DA-CD NPs into the right nostril showed the presence of NPs only in the right olfactory bulb and no morphological tissue damage occurred. Thus, these GCS based NPs could be potentially used as carriers for nose-to-brain DA delivery for the Parkinson's disease treatment.

The development of in vitro 3D models to get insights into the mechanisms of bone regeneration could accelerate the translation of experimental findings to the clinic, reducing costs and duration of experiments. This work explores the design and manufacturing of multi-compartments structures in poly(ε-caprolactone) (PCL) 3D-printed by Fused Filament Fabrication technique. The construct was designed with interconnected stalls to host stem cells and endothelial cells. Cells were encapsulated within an optimised gellan gum (GG)-based hydrogel matrix, crosslinked using strontium (Sr2+) ions to exploit its bioactivity and finally, assembled within compartments with different sizes. Calcium (Ca2+)-crosslinked gels were also used as control for comparison of Sr2+ osteogenic effect. The results obtained demonstrated that Sr2+ ions were successfully diffused within the hydrogel matrix and increased the hydrogel matrix strength properties under compressive load. The in vitro co-culture of human-TERT mesenchymal stem cells (TERT- hMSCs) and human umbilical vein endothelial cells (HUVECs), encapsulated within Sr2+ ions containing GG-hydrogels and inter-connected by compartmentalised scaffolds under osteogenic conditions, enhanced cell viability and supported osteogenesis, with a significant increase of alkaline phosphatase activity, osteopontin and osteocalcin respect with the Ca2+-crosslinked GG-PCL scaffolds. These outcomes demonstrate that the design and manufacturing of compartmentalised co-culture of TERT-hMSCs and HUVEC populations enables an effective system to study and promote osteogenesis.

Ochratoxins are fungal secondary metabolites that may contaminate a broad variety of foodstuffs, such as grains, vegetables, coffee, dried fruits, beer, wine and meats. Ochratoxins are nephrotoxins, carcinogens, teratogens and immunotoxins in rats and are also likely to be in humans. In 2009/2010, a survey of the presence of Ochratoxin A (OTA) in regularly hunted wild boars in the Calabria region of southern Italy detected OTA in 23 animals in the kidney, urinary bladder, liver and muscles: 1.1 ± 1.15, 0.6 ± 0.58, 0.5 ± 0.54 and 0.3 ± 0.26 μg/kg, respectively. Twelve tissue samples showed levels of OTA higher than the guideline level (1 μg/kg) established by the Italian Ministry of Health. In five wild boars, gross-microscopic lesions were described for the organs displaying the highest concentrations of OTA determined by HPLC-FLD analysis, i.e., the kidney, liver and urinary bladder.

The present work investigated the possibility of preparing nanoparticles based on methacryloylglycylglycine (MAGG) and chitosan (CS) by in situ polymerization. The study revealed that nanoparticle formation was strictly dependent on ionic interactions between NH3 ? groups from CS and COO- groups arising from the anionic monomer MAGG. The subsequent in situ polymerizations of MAGG in the presence of CS led to the formation of nanoparticles with homogeneous morphology, a uniform particle size distribution, and a good spherical shape as confirmed by laser diffraction granulometry and scanning electron microscopy analyses. Nanoparticle formulations with different amounts of CS and MAGG were prepared, and their chemical compositions were investigated by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The obtained results showed that the polymerization of MAGG in the presence of CS appears to be a very promising approach in the preparation of nanoparticles for drug delivery applications.

The ability to predict the in vivo performance of multiblock-copolymer-based biomaterials is crucial for their applicability in the biomedical field. In this work, XPS analysis of PCL-PEG copolymers was carried out, as well as morphological and wettability evaluations by SEM and CA measurements, respectively. XPS analysis on films equilibrated in PBS demonstrated a further enrichment in the PEG component on the surface. Copolymer films obtained by casting using different solvents showed a dependence in segregation according to the solvent employed. Cell adhesion tests demonstrated the importance of copolymer segregation and rearrangement in a wet environment, with a dependence of these phenomena on the copolymer molecular weight.

The processes of lipids oxidation represent a great concern for the consumer health because they are one of the major causes of quality deterioration in fat-containing products. One of the most effective methods of delaying lipid oxidation consists in incorporating antioxidants. The present investigation describes the formulation of chitosan and novel glycol chitosan nanoparticles (NPs) loaded with α-Tocopherol (αToc-NPs). The obtained NPs were characterized by various techniques, such as particle size (showing mean diameters in the range 335-503 nm) and zeta potential measurements, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The NPs were, then, added in the preparation of oil-in-water simple emulsion both to make the lipophilic αToc available in an aqueous medium and to prevent emulsion oxidation. For this purpose, a new highly sensitive, simple and solvent-free method based on a solid phase microextraction (SPME) coupled to gas chromatography mass spectrometry was developed for the determination of αToc in aqueous medium. All the parameters influencing SPME, including fiber coating, time and temperature extraction, pH, ionic strength and desorption conditions, have been carefully screened. The method was successfully applied to the determination of vitamin in the αToc-NPs and its release from NPs-enriched simple emulsion formulations. SPME provided high recovery yields and the limits of detection and of quantification in emulsion were 0.1 and 0.5 μg/mg, respectively. The precision of the method has been also estimated. The delay of the lipid oxidation by the proposed formulations has been evaluated exploiting the Kreis test on αToc-NPs-enriched emulsions.