Two simple small molecules are designed and successfully implemented here as hole-transporting material (HTM) in perovskite-based solar cells (PSCs). With the aim of elucidating the interconnection between molecular structure, properties, and their role in the working devices, these HTMs are implemented in both thin planar direct (n–i–p) and inverse (p–i–n) geometries. It is observed how the HTM layer morphology influences the photovoltaic performance. Moreover, from analysis of the different devices, fundamental information is retrieved on the factors influencing small molecule hole extracting/transporting functionality in PSCs. Specifically, two main roles are identified: When HTMs are introduced as growing substrate (p–i–n), there is a positive impact on the device performance via influence of perovskite formation; meanwhile, their efficacy in transporting the holes governs the performance of direct configurations (n–i–p). These findings can be extended to a wide family of small molecule HTMs, providing general rules for refining the design of novel and more efficient ones.

One of the most fascinating characteristics of perovskite solar cells (PSCs) is the retrieved obtainment of outstanding photovoltaic (PV) performances withstanding important device configuration variations. Here we have analyzed CH3NH3PbI3-xClx in planar or in mesostructured (MS) configurations, employing both titania and alumina scaffolds, fully infiltrated with perovskite material or presenting an overstanding layer. The use of the MS scaffold induces to the perovskite different structural properties, in terms of grain size, preferential orientation, and unit cell volume, in comparison to the ones of the material grown with no constraints, as we have found out by X-ray diffraction analyses. We have studied the effect of the PSC configuration on photoinduced absorption and time-resolved photoluminescence, complementary techniques that allow studying charge photogeneration and recombination. We have estimated electron diffusion length in the considered configurations observing a decrease when the material is confined in the MS scaffold with respect to a planar architecture. However, the presence of perovskite overlayer allows an overall recovering of long diffusion lengths explaining the record PV performances obtained with a device configuration bearing both the mesostructure and a perovskite overlayer. Our results suggest that performance in devices with perovskite overlayer is mainly ruled by the overlayer, whereas the mesoporous layer influences the contact properties.

In this work glucose (G), α-cyclodextrin (α-CD) and sodium salt of carboxymethyl cellulose (CMCNa) are used as dispersing agents for graphene oxide (GO), exploring the influence of both saccharide units and geometric/steric hindrance on the rheological, thermal, wettability and electrochemical properties of a GO/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) nanocomposite. By acting on the saccharide-based additives, we can modulate the rheological, thermal, and wettability properties of the GO/PEDOT:PSS nanocomposite. Firstly, the influence of all the additives on the rheological behaviour of GO and PEDOT:PSS was investigated separately in order to understand the effect of the dispersing agent on both the components of the ternary nanocomposite, individually. Subsequently, steady shear and dynamic frequency tests were conducted on all the nanocomposite solutions, characterized by thermal, wettability and morphological analysis. Finally, the electrochemical properties of the GO/ PEDOT composites with different dispersing agents for supercapacitors were investigated using cyclic voltammetry (CV). The CV results revealed that GO/PEDOT with glucose exhibited the highest specific capacitance among the systems investigated.

Here we conceive an innovative nanocomposite to endow hybrid perovskites with the easy processability of polymers, providing a tool to control film quality and material crystallinity. We verify that the employed semiconducting polymer, poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), controls the self-assembly of CH₃NH₃PbI₃ (MAPbI₃) crystalline domains and favors the deposition of a very smooth and homogenous layer in one straightforward step. This idea offers a new paradigm for the implementation of polymer/perovskite nanocomposites towards versatile optoelectronic devices combined with the feasibility of mass production. As a proof-of-concept we propose the application of such nanocomposite in polymer solar cell architecture, demonstrating a power conversion efficiency up to 3%, to date the highest reported for MEH-PPV. On-purpose designed polymers are expected to suit the nanocomposite properties for the integration in diverse optoelectronic devices via facile processing condition.

We exploit TiO2 surface functionalization as a tool to induce the crystallization process of CH3NH3PbI3−xClx perovskite thin films resulting in a reduction of the degree of orientation of the (110) crystallographic planes. Notably, the variation of the film crystalline orientational order does not affect the photovoltaic performances of the perovskite-based devices, whose efficiency remains mostly unchanged. Our findings suggest that other factors are more significant in determining the device efficiency, such as the non-homogenous coverage of the TiO2 surface causing charge recombination at the organic/TiO2 interface, defect distribution on the perovskite bulk and at the interfaces, and transport in the organic or TiO2 layer. This observation represents a step towards the comprehension of the perovskite film peculiarities influencing the photovoltaic efficiency for high performance devices.

The introduction of alkoxy chains in the molecular architecture of meso push-pull porphyrins is of paramount importance aiming at high performing dye-sensitized solar cells (DSSCs) based on these specific sensitizers. Recently, we have demonstrated that the same approach is fruitful even if it is applied to tetraarylporphyrins with an acceptor/anchoring substituent in the [small beta]-pyrrolic position. In particular, among the ortho-ortho, the ortho-para and the ortho-functionalization of the aryl rings with an octyloxy chain, we identified the latter as the most performing in the series, showing a good balance between the dye loading and the reduction of [small pi]-[small pi] aggregation. Herein, focusing our attention on the mono-ortho-functionalized molecular structure, we have investigated the effect of the alkoxy chain length and nature on the reduction of dye-to-dye aggregation as well as on the enhancement of light harvesting capabilities, finding an almost linear relationship between the device photon conversion efficiency (PCE) and the alkoxy chain length both in the presence and in the absence of a co-disaggregating agent.

Charge generation and transport in (CH3NH3) Pbl(3-x)Cl(x) sensitized mesostructured solar cells are investigated. A highly efficient charge generation is directly proven by time correlated single photon counting analysis. Photoinduced absorption and transient photo-voltage investigations depict double charge recombination dynamics. To explain the high device performances according to those spectroscopic observations, we suggest the existence of two complementary paths for electron transport, involving either TiO2 or perovskite matrixes.

Hybrid halide perovskites represent one of the most promising solutions toward the fabrication of all solid nanostructured solar cells, with improved efficiency and long-term stability. This article aims at investigating the structural properties of iodide/ chloride mixed-halide perovskites and correlating them with their photovoltaic performances. We found out that, independent of the components ratio in the precursor solution, Cl incorporation in an iodide-based structure, is possible only at relatively low concentration levels (below 3-4%). However, even if the material band gap remains substantially unchanged, the Cl doping dramatically improves the charge transport within the perovskite layer, explaining the outstanding performances of meso-superstructured solar cells based on this material.

Hybrid halide perovskites have emerged as promising active constituents of next generation solution processable optoelectronic devices. During their assembling process, perovskite components undergo very complex dynamic equilibria starting in solution and progressing throughout film formation. Finding a methodology to control and affect these equilibria, responsible for the unique morphological diversity observed in perovskite films, constitutes a fundamental step towards a reproducible material processability. Here we propose the exploitation of polymer matrices as cooperative assembling components of novel perovskite CH3NH3PbI3 : polymer composites, in which the control of the chemical interactions in solution allows a predictable tuning of the final film morphology. We reveal that the nature of the interactions between perovskite precursors and polymer functional groups, probed by Nuclear Magnetic Resonance (NMR) spectroscopy and Dynamic Light Scattering (DLS) techniques, allows the control of aggregates in solution whose characteristics are strictly maintained in the solid film, and permits the formation of nanostructures that are inaccessible to conventional perovskite depositions. These results demonstrate how the fundamental chemistry of perovskite precursors in solution has a paramount influence on controlling and monitoring the final morphology of CH3NH3PbI3 (MAPbI3) thin films, foreseeing the possibility of designing perovskite : polymer composites targeting diverse optoelectronic applications.

A spectroscopic investigation focusing on the charge generation and transport in inverted p-type perovskite-based mesoscopic (Ms) solar cells is provided in this report. Nanocrystalline nickel oxide and PCBM are employed respectively as hole transporting scaffold and hole blocking layer to sandwich a perovskite light harvester. An efficient hole transfer process from perovskite to nickel oxide is assessed, through time-resolved photoluminescence and photoinduced absorption analyses, for both the employed absorbing species, namely MAPbI3-xClx and MAPbI3. A striking relevant difference between p-type and n-type perovskite-based solar cells emerges from the study.

Low-molecular-weight organic gelators are widely used to influence the solidification of polymers, with applications ranging from packaging items, food containers to organic electronic devices, including organic photovoltaics. Here, this concept is extended to hybrid halide perovskite-based materials. In situ time-resolved grazing incidence wide-angle X-ray scattering measurements performed during spin coating reveal that organic gelators beneficially influence the nucleation and growth of the perovskite precursor phase. This can be exploited for the fabrication of planar n-i-p heterojunction devices with MAPbI3 (MA = CH3NH3 +) that display a performance that not only is enhanced by ≈25% compared to solar cells where the active layer is produced without the use of a gelator but that also features a higher stability to moisture and a reduced hysteresis. Most importantly, the presented approach is straightforward and simple, and it provides a general method to render the film formation of hybrid perovskites more reliable and robust, analogous to the control that is afforded by these additives in the processing of commodity “plastics.”

In this work, the influence of graphene oxide (GO) doped Poly(3,4 ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) thin nanocomposite on an indium–tin-oxide (ITO) anode, as hole transport layer (HTL) in perovskite solar cells, was investigated. Different concentrations of GO were added into the PEDOT:PSS in order to enhance its conductivity. In particular, the influence of GO content on the rheological and thermal properties of Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/ GO nanocomposites was initially examined. The GO filler was prepared by using modified Hummers method and dispersed into PEDOT:PSS in different quantity (ranging from 0.05 to 0.25%wt/wt). The obtained nanocomposite solutions were analyzed by rheological characterizations in order to evaluate the influence of the GO filler on the viscosity of the PEDOT:PSS matrix. The wettability of solutions was evaluated by Contact Angle (CA) measurements. The quality of GO dispersion into the polymer matrix was studied using Scanning electron microscopy (SEM) and X-ray diffraction (XRD). Thermal characterizations (DSC and TGA) were, finally, applied on nanocomposite films in order to evaluate thermal stability of the films as well as to indirectly comprehend the GO influence on PEDOT:PSS-water links

Thanks to their high stability, good optoelectronic and extraordinary electrochromic properties, tungsten oxides are among the most valuable yet underexploited materials for energy conversion applications. Herein, colloidal one-dimensional carved nanocrystals of reduced tungsten trioxide (WO3-x) are successfully integrated, for the first time, as a hole-transporting layer (HTL) into CH3NH3PbI3 perovskite solar cells with a planar inverted device architecture. Importantly, the use of such preformed nanocrystals guarantees the facile solution-cast-only deposition of a homogeneous WO3-x thin film at room temperature, allowing achievement of the highest power conversion efficiency ever reported for perovskite solar cells incorporating raw and un-doped tungsten oxide based HTL.

The emission of light in two-dimensional (2-D) layered hybrid organic lead halide perovskites, namely (R-NH3)2PbX4, can be effectively tuned using specific building blocks for the perovskite formation. Herein this behaviour is combined with a non-covalent graphene functionalization allowing excellent selectivity and spatial resolution of the perovskite film growth, promoting the formation of hybrid 2-D perovskite : graphene heterostructures with uniform coverage of up to centimeter scale graphene sheets and arbitrary shapes down to 5 μm. Using cryo-Raman microspectroscopy, highly resolved spectra of the perovskite phases were obtained and the Raman mapping served as a convenient spatially resolved technique for monitoring the distribution of the perovskite and graphene constituents on the substrate. In addition, the stability of the perovskite phase with respect to the thermal variation was inspected in situ by X-ray diffraction. Finally, time-resolved photoluminescence characterization demonstrated that the optical properties of the perovskite films grown on graphene are not hampered. Our study thus opens the door to smart fabrication routes for (opto)-electronic devices based on 2-D perovskites in contact with graphene with complex architectures.

To unveil the mechanisms controlling photovoltaic conversion in high-performing perovskite-based meso-structured solar cells, we focus on the key role played by the mesoporous oxide/perovskite interface. We employ several spectroscopic techniques to design a complete scenario and corroborate our results with first principle density functional theory calculations. In particular Stark spectroscopy, a powerful tool allowing interface-sensitive analysis is employed to prove the existence of oriented permanent dipoles, consistent with the hypothesis of an ordered perovskite layer, close to the oxide surface. The existence of a structural order, promoted by specific local interactions, could be one of the decisive reasons for highly efficient carriers transport within perovskite films.

We have developed a novel and straightforward approach for the green synthesis of reduced graphite oxide (rGO). First, graphite oxide (GO) was prepared by the Hummers' oxidation method, starting from high-surface-area graphite. Then, rGO was generated from GO in aqueous suspension through a UV-irradiation treatment. The influence of different process parameters (including type of UV source, irradiation time and atmosphere) on the GO reduction efficiency was explored and evaluated on the basis of the data acquired by several experimental techniques, such as infrared spectroscopy in attenuated total reflectance mode, X-ray diffraction, UV-vis absorption spectrophotometry, X-ray photoelectron spectroscopy and thermogravimetry. The acquired results allowed identifying appropriate sets of reaction conditions under which GO reduction yield could be maximized. In particular, the highest reduction degree was obtained by exposing GO to UV light in a UV oven for 48 h under inert atmosphere. The reduction strategy developed by us represents an innovative low-cost and easy route to graphene-based nanomaterials, which does not require any stabilizer, photocatalyst or reducing agent. For this reason, our method represents an attractive environmentally friendly alternative approach for the preparation of stable rGO dispersions in large-scale amounts, to be utilizable in disparate engineering applications.

Inthis paper, we have investigated the possibility to realize a nanocomposite buffer layer for perovskite solar cells, based on polyelectrolyte poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) PEDOT:PSS and graphene oxide (GO). To this aim, GO, prepared by a modified Hummers method, was mixed with PEDOT: PSS by solvent swelling method and reduced in situ into the polymer matrix through a green and simple method, by using UV radiation. Thin nanocomposite layers were spin coated on different substrates and characterized by several techniques. GO reduction was first analyzed by XPS analyses, monitoring the decrease of the intensity of the peak of the oxygen groups linked to carbon. The grade of the dispersion of GO into PEDOT: PSS was also analyzed by scanning electron microscopy. Sheet resistance measurements of the films with and without GO before and after UV treatment was performed. The thermal stability of the nanocomposites was then evaluated by thermogravimetric analyses. The nanocomposite layer was finally employed in a perovskite solar cell to evaluate the effect of GO reduction on power conversion efficiency. The interface interaction between the nanocomposite and the perovskite precursors was analyzed by contact angle measurements.