Abstract

This presentation reports the comparison of the machining performance of micro-EDM milling and sinking for the fabrication of micro-channels with controlled sloped walls realized in a hardened steel workpiece. The machining regime used for both micro-EDM sinking and milling is the fine-finishing. The results show that micro-EDM sinking is about 9 times faster than milling, though the effects of tool wear become relevant inducing a lack of accuracy in the final micro-features. Despite the slower machining time, micro-EDM milling provides a better control of the micro-channel dimensions and draft angles of the walls. No difference related to surface roughness is detected, since the energy level used in both approaches is the same. A micro-filter for hearing aid, dialysis media and inhaler, having a diameter of 2.3 mm characterized by a grid of 76 micro-pins, is machined in order to show the potential of the combination of both technologies

Autore Pugliese

• Modica Francesco Giovanni , Marrocco Valeria , Basile Vito

Tutti gli autori

• F. Modica; V. Basile; V. Marrocco; I. Fassi

Titolo volume/Rivista

Non Disponibile

Anno di pubblicazione

2015

ISSN

Non Disponibile

ISBN

Non Disponibile

Numero di citazioni Wos

Nessuna citazione

Ultimo Aggiornamento Citazioni

Non Disponibile

Numero di citazioni Scopus

Non Disponibile

Ultimo Aggiornamento Citazioni

Non Disponibile

Settori ERC

Non Disponibile

Codici ASJC

Non Disponibile